MOLRO Series Type III water Machine
- The type III water machine is the economic model for users which only need pure water for chemical & physical inspection, analysis resolution preparation and laboratory clean water of instruments.
- The outlet water conductivity is from 1-10μs/cm, which meet the type III water quality of GB6682-2208 and ASTM NCCLS CAP standard.
Description
Type III pure water is widely used in following appliance:
- Conventional chemical physical test
- Solution preparation
- Cleaning pure water for instruments in lab
Technical Specification
| Model | Molro 210s | Molro 210d |
| Process | Single stage RO | Double stage RO |
| Output of type III pure water | ≥10L/H | ≥10L/H |
| Conductivity @25℃(type 3 water) | ≤10μs/cm | ≤5μs/cm |
| PH | 5.0-7.5 | 5.0-7.5 |
| Oxidizabes | ≤0.4mg/L | ≤0.4mg/L |
| Evaporation residue | ≤2.0mg/L | ≤2.0mg/L |
