Laboratory Deionized Water System

The type III water machine is the economic model for users which only need pure water for chemical & physical inspection, analysis resolution preparation and laboratory clean water of instruments. The outlet water conductivity is from 1-10μs/cm, which meet the type III water quality of GB6682-2208 and ASTM NCCLS CAP standard. Share to Product Description…

Water Quality Standards and Core Technologies System Introduction This system adopts double stage reverse osmosis+EDI processing technology to produce pure water for hospital laboratory production, analytical grade pure water, and is transported to hospital water points for use through the water supply network. Share to Purification Process Process flow: Raw water → Pre treatment (PP filter+activated…

Molewater system provide high purity ultrapure water system with capacity 10L/H to 150L/H. It is widely used in domestic and foreign laboratory. Machine produced water comply with the ASTM, CAP, NCCLS and China GB6682-2008 Standard. Share to Applications Technical Specification Model Molelement 810s Molelement 810d Process Single stage RO Double stage RO Output of pure…

Molewater Molcell series is design with single stage RO or double stage RO to meet different customer needs. This model produced ultra pure water can reach 18.25MΩ.Cm, it suitable for most laboratory experiments. Share to Applications Technical Specification Model Molcell 710s Molcell 710d Process Single stage RO Double stage RO Output of pure water ≥10L/H…

Molewater Molatom series ultrapure water machine is the most economic design to get ultra pure water. This model is suitable for the experiments that have no requirements on the bacteria, TOC and particles. Share to Applications Conventional physical and chemical analysis experiments. Eg. Toxicity test, quantitative analysis of trace element, buffer solution Technical Specification Model…

Molecular provides 10l/hr to 150l/hr type I ultrapure water machine for laboratory applications. The produced water quality meet the ASTM, CAP, NCCLS and China GB6682-2008 Standard. Typically, an ultrapure water or high purity laboratory water system mainly consist of four parts: pretreatment stage, reverse osmosis stage, polishing stage and delivery parts. Share to Product Description…