Animal Drink Water Equipment

Application&Compliance：
Molecular animal drinking water equipment is specifically engineered to deliver ultra-pure, contaminant-free water for a wide range of laboratory animals, supporting diverse research scenarios.
Our equipment meets the National Standard for Laboratory Animal Environment and Facilities (GB14925-2010). For primary cleanliness, it also aligns with GB5749-2022 “Standard for Drinking Water Quality”, ensuring laboratory animals access water that’s sterile, safe, and free of contaminants.

Share to

Main Processes

Stage	Technology & Key Details
Pretreatment	– Quartz sand filtration (removes sediment, rust) – Activated carbon (eliminates organics, chlorine)
Membrane Filtration	– MF (0.1–1μm) or UF (0.01–0.1μm) – Traps bacteria, viruses, fine impurities
Sterilization	– Thermal: 120℃, 132kPa, 30min (for barrier environments) – Chemical: pH 2.5–3.0 (acid) or 8.5–9.0 (alkaline) (inhibits microbial growth)
Storage & Distribution	– Stainless steel tank (anti-corrosion) – Real-time monitoring: pH, flow, turbidity

Considerations-Cleaning and disinfection of vessels

(1) Remove the residues of feed and drinking water in the water-containing vessels, and use a neutral detergent water solution to wash the attached dirt

(2) Add sodium hypochlorite to the cleaning water tank and adjust the concentration to 100~200ppm

(3)Completely immerse the drinking bottle in the sink for 12~24h

(4)ash the attached disinfectant solution on the drinking bottle with water, and the disinfectant solution in the sink is replaced again.

(5) After drying, put it in the specified clean place, and make the necessary wrapping cover to prevent secondary pollution, and wait for use