Sulphate is commonly found in industrial wastewater from industries such as mining, mineral processing, chemical manufacturing, and metal production. It may enter the water through raw materials, process chemicals, or the dissolution of sulphate-containing minerals. When sulphate levels are too high, wastewater treatment becomes more challenging, particularly when the water must meet discharge standards or…
If you own an industrial RO system you have likely looked at the drain pipe and wondered how much good water is going down it. It all comes down to one number: the RO recovery rate. Setting the recovery rate appropriately can reduce feed water consumption, but pushing it too high can increase the risk of…
Each reverse osmosis unit produces two streams which are clean permeate as well as an unrefined leftover, known as reject water. A majority of facilities will send the rejected water straight to the sewer and treat it as waste. But is it really required? Most of the time, not. If you have the proper treatment and…
Water scarcity is an increasing concern for businesses around the world, and many facilities are asking a practical question: since wastewater has already been treated, why not use it again? It’s not as basic as it looks, and an incorrect choice might lead to equipment damage, process problems or compliance headaches. This guide covers what is…
The best feed water for a Water for Injection (WFI) system is not necessarily the purest water available. In most cases, WFI production starts with compliant drinking water or purified water, while the pretreatment train is designed around the source water’s actual chemistry and microbiological characteristics. The most important question is not just “How pure…
Water may be the most overlooked ingredient in a beverage, even though it often makes up more than 85% of the finished product. Whether a plant produces bottled water, soft drinks, juice, dairy beverages, or beer, the quality of the incoming water can affect far more than basic safety. A small change in mineral content,…
If your seawater reverse osmosis system is showing rising differential pressure, declining normalized flux, or a slow drop in permeate quality, membrane fouling is almost always the underlying cause. Fouling is rarely triggered by a single factor — it’s usually a combination of feedwater conditions, pretreatment gaps, and operating parameters working together. Understanding the full…
Choosing the wrong industrial water treatment system might do more than just cause poor water quality. It could mean frequent shutdowns, quick membrane fouling, failed production audits or a system that just can’t keep up with daily demand. And this nearly always comes down to one core problem. The system was evaluated for capacity, and…
You measure your feed water and the number comes back high — now the real question is why. The high Silt Density Index (SDI) reading is among the most evident early warning indicators that reverse Osmosis (RO) process is headed towards membrane fouling, a higher differential pressure and frequently chemically cleaned. Before troubleshooting can begin…
As wastewater discharge requirements become stricter, many treatment plants are facing the same practical problem: how to remove more nitrogen and phosphorus without building larger tanks or significantly increasing operating costs. At the same time, conventional activated sludge systems can require substantial aeration, tank volume, and sludge handling. Biofilters offer another approach. By growing microorganisms…
End of content
End of content
Consult With Us
WhatsApp: +86 138 8397 3242
Tel/Wechat: +86 138 8397 3242
No.29, Baishiyi, Baihai Road, High-tech District, Chongqing, China
© 2025 Molewater System Co.,Ltd